Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Transmitter and Receiver Set

Replacement Value : $2,913
View Pricing Chart

Recommended Accessories


Milled Aluminum Chassis and Regulation-Compliant PCB

Video Inputs

SDI: 1 x BNC (75 Ohm), 3G/HD/SD
HDMI: 1 x HDMI Type A Receptacle

Video Outputs

SDI: 1 x BNC (75 Ohm), 3G/HD/SD, Loop-Through

Color Sampling

SDI: YCbCr 4:2:2, 10-bit (8-Bit when Format Conversion is Enabled)
HDMI: RGB 4:4:4, 8-Bit


<0.001 Seconds (TX to RX without Format Conversion)

Supported Resolutions

1080p: 60/59.94/50/30/29.97/25/24/23.98
1080PsF: 30/29.97/25/24/23.98
1080i: 60/59.94/50
720p: 60/59.94/50
480i: 59.94
576i: 50

Video Processing

Visually Lossless

Color Correction
CDL/1024 1D LUT (Supports 10-Bit Color)
33x33x33 3D LUT (Supports 10-Bit Color)

Audio Compression

48 kHz, 24-bit PCM

Audio Input



Switches: On/Off and Reset
Desktop App: Feature-Rich Bolt Manager Application for OS X and Windows
USB Interface Functionality: Upgrade via Mini-USB


Non-DFS Frequencies

  • UA: 5.19 to 5.23 GHz, 5.755 to 5.795 GHz
  • EU & JP: 5.19 to 5.23 GHz

DFS Frequencies

  • US: 5.27 to 5.55 GHz and 5.67 GHz
  • EU & JP: 5.27 to 5.67 GHz

RF Power

17 dBm EIRP




Up to 500' / 152.4 m Line of Sight

Unicast Multicast

Unicast / Multicast

Noise Rejection

Can Coexist with Wi-Fi and 5 GHz Cordless Phones

Power Input

2-Pin Connector
7 to 17 VDC

Power Consumption

Nominal 7.3 W (Measured at 1080p60)

Operating Temperature

32 to 104°F / 0 to 40°C


1 x 1/4"-20 Threaded Mounting Hole
2 x M3 Threaded Mounting Holes


0.95 x 2.6 x 4.47" / 2.41 x 6.6 x 11.35 cm


8 oz / 226 g

- Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Transmitter (TE5XT3GTX)
- Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Receiver (TE5XT3GRX)
- USB 3.0 Cable Type-A to Micro-B (USB3-MCRB)
- AC Adapter

The Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Transmitter and Receiver Set includes one transmitter and one receiver. This enables you to immediately start transmitting up to 1080p60 video from either an SDI or HDMI source. The zero-latency transmitter/receiver pair features a 500' line-of-site transmission distance. You can send and receive visually lossless 3G-video signals from a Bolt 500 transmitter with zero latency. The transmitter features cross conversion, so you take an SDI signal in and loop out either an SDI or HDMI signal to your on-camera monitor.
The receiver also features both SDI and HDMI outputs, and the system supports digital SD and HD signals. Although the inputs and outputs support a variety of HD signals in both 50 and 60 Hz standards, as well as 480i and 576i, only HDMI supports 480p and 576p. You can transmit up to three other 3rd-generation Bolt receivers as the transmitter can support up to four receivers. The built-in AES 128-bit encryption helps keep your transmitted video safe from prying eyes.

You recently viewed

Clear recently viewed