Profoto Air Remote TTL-N Transmitter for Nikon

SKU : PRARTTLN
Replacement Value : $558
View Pricing Chart

Recommended Accessories

Wireless

Channels

8

Groups

3

Wireless Range

330 to 1000' / 100 to 300 m

Radio Frequency

2.4 GHz

General

Control Modes

Manual, TTL

Sync Speed

1/250 Sec (Normal)
1/8000 Sec (High-Speed)

Connectivity

Ports

1 x Mini-USB

Mounting

Bottom Mount

Hot Foot

Electrical

Battery Type

2 x AAA

Physical

Dimensions

Transmitter: 3 x 2.3 x 1.6" / 77 x 60 x 40 mm

Weight

3.2 oz / 90.7 g

- Profoto Air Remote TTL-N Transmitter for Nikon (PRARTTLN)
- 2 x AAA Batteries
- Wrist Strap
- USB 2.0 Cable
- Protective Cap
- Accessory Pouch

The Profoto Air Remote TTL-N Transmitter for Nikon is a proprietary trigger designed for strobes that support the Profoto Air System. It maximizes the potential of your AirTTL-equipped flashes and allows you to remotely turn on/off the modeling lights or heads, making it easier to adjust lights in your studio.

Profoto Air System

AirTTL flashes & packs, such as the B1X and Pro-10 support TTL communication from an Air Remote TTL-N and a compatible Nikon camera. Shooting becomes very simple as the camera and flashes automatically determine the best power settings for the scene so as to produce a properly exposed image.

Radio Triggering

The controller has 8 digital channels and 3 groups of lights on each channel, ensuring minimal interference with other nearby systems and equipment. Each group can be controlled independently from one another, permitting ±2 EV adjustment of power ratios for TTL systems and nine stops of manual control. Operating on a 2.4 GHz radio system frequency, the Air Remote can sync with flashes up to 1000' away with normal triggering and 330' with TTL/HSS.

High-Speed Sync Mode

The AirTTL remotes are equipped with Profoto High-Speed Sync (HSS), enabling the use of your flash at shutter speeds up to 1/8000 second. HSS allows you to control and shape light in broad daylight, while getting crisp images without motion blur when mixing flash with available light.

Mode of Operation

In addition to TTL and manual controls, with AirTTL flashes and packs, you can make use of both with hybrid operation where an initial exposure is captured with TTL and then the system is switched into manual where it retains the exposure settings.

Build

The Air Remote attaches to the camera's hot shoe. There’s a digital readout of the light setup, and a variety of physical buttons for making adjustments. Additionally, there is a mini-USB port for installing firmware updates and it is powered by two AAA batteries.

  • The Profoto Air Remote TTL-N for Nikon gives you fully automated control of compatible Profoto strobes with i-TTLcompatible Nikon cameras.
  • This transmitter allows TTL wireless firing between a Nikon camera and AirTTL-compatible Profoto lights. The TTL-N will also trigger non-TTL Air heads and packs but without the TTL feature.
  • This transmitter is compatible with the following Flashes:

AirTTL (TTL, HSS, Remote Control, Manual Sync):

A1 AirTTL, B1 500 AirTTL, B1X 500 AirTTL, B2 250 AirTTL, D2 200 AirTTL, D2 1000 AirTTL, Pro-10 2400 AirTTL

Air (Remote Control & Manual Sync)

D1 Air 250, D1 Air 500, D1 Air 1000, D4 Air 1200, D4 Air 2400, D4 Air 4800, Pro-B4 1000 Air, Pro-8a 1200 Air

You recently viewed

Clear recently viewed