Ikelite 200DL Underwater Housing for Panasonic GH5/GH5S

Replacement Value : $2217
View Pricing Chart

Recommended Accessories

Depth Rating

200' / 61 m

Control Type

Mechanical push-buttons, knurled knobs/dials, and levers


Provide access to most camera functions

Material of Construction

Polycarbonate and ABS plastic blend

Lens Port

Ships without a required lens port
Accepts all Ikelite Dry Lock (DL) series dome and flat ports for various lenses
See Port Chart linked in Overview for full compatibility details


Nearly neutral in fresh water
Precise buoyancy varies depending on choice of lens and port

External Flash Connector

Ikelite ICS-5 bulkhead connector with manual hot shoe
Optional #46031 TTL circuit and hot shoe will allow for TTL operation with compatible Ikelite DS strobes
Non-Ikelite strobes will work in manual mode only


2x 1/4"-20 threaded mounts with 3.5" / 8.9 cm spacing for included tray
1x spare 1/2-20 threaded accessory port


9.2 x 7.1 x 6.5" / 23.4 x 18 x 16.5 cm


5.1 lb / 2.3 kg excluding tray and handles

- Ikelite 200DL Underwater Housing for Panasonic GH5/GH5S (PAIK200DL)
- Ikelite Port Hole Cover for Housings with Dry Lock Mount
- Ikelite DL Zoom Gear Retainer
- Ikelite ICS Bulkhead Cap
- Ikelite 2cc Tube of Silicone Lubricant for O-Rings
- Ikelite Control and Push Button Covers
- Ikelite 1/16" Hex Head Allen Wrench for Gears on Housings
- Ikelite 1/8" Hex Head Allen Wrench for Control Knobs on Housings

Capture sharp, detailed images at depths as great as 200' with Ikelite's 200DL Underwater Housing with Dry Lock Port Mount and Vacuum Valve for your Panasonic Lumix GH5 or GH5S Mirrorless Camera. An Ikelite bulkhead connector with a manual hot shoe connection enables reliable electrical triggering of optional, external strobes. Using the optional #46031 TTL circuit and hot shoe will allow for TTL operation with compatible Ikelite DS strobes; non-Ikelite strobes will still work in manual mode only.
Ergonomic mechanical controls, including pushbuttons, knurled knobs/dials, and levers, afford access to most camera functions. Built for durability, the enclosure is made in the USA from a corrosion-resistant polycarbonate and ABS plastic blend. It's white on the front, top, sides, and bottom, but clear in the back to allow you to monitor the O-ring seal and maintain your view of the camera's rear controls. The supplied aluminum tray with a left-hand quick-release grip affords improved balance and handling, while offering an attachment point for an optional lighting arm.
The housing ships without a required lens port, and accepts all Ikelite Dry Lock (DL) series dome and flat ports for a broad array of zoom, macro, and wide-angle lenses. See the Port Chart. The DL port system accommodates lenses with large diameters, and provides added security against leaks at the surface, thanks in large part to the included vacuum valve for checking watertight integrity before the dive. You'll need to pick up the required pump in order to remove excess air and actually create a vacuum.

You recently viewed

Clear recently viewed