Specifications Stabilizer Type Vest System Load Capacity 24 to 28.5 lb / 10.9 to 12.9 kg Height 39 to 43" / 100 to 110 cm Wei...View full details
- FLOWCINE Serene (FLFCSERENE)
- Drilling Template
The FLOWCINE Serene is a two-axis spring arm stabilizer that attaches at the end of the Easyrig (2/2.5/3/Vario 5) arm. It stabilizes vibrations and motion errors on the vertical axis that comes from walking or running with the rig. It also stabilizes side to side errors in the same scenarios by counter pivoting around its center axis. The Serene also allows for full use of the Easyrig spring extension for going from high to low mode.
The Serene can take camera setups between 13.2-44lb, and you can easily fine tune the spring tension without tool. Of course it works great with the Gravity One, but it also works really well for other gimbal rigs like the Freefly MoVI, DJI Ronin, Letus Helix and most other leading gimbal rigs. This arm allows you to get the camera rig at the right distance from your body. Furthermore, you can experience the wide range of professional shots with extreme smoothness.
Modifies Your Existing Easyrig
The Serene mounts at the very end of the Easyrig arm, and the string is routed upwards and through the Serene instead of the normal way straight down from the tip of the Easyrig. To make this happen, you have to modify your Easyrig arm by drilling one or two holes; depending on Easyrig model. A drilling template is included for the exact placement of the holes.
The Serene gives smooth video results by mitigating vertical vibrations induced by walking or running during a tracking shot. It also stabilizes side to side motion in similar tracking situations by counter-pivoting around its center axis. At the same time you have full use of the Easyrig cord extension that will allow you to go from high to low mode while at the same time the Serene will take care of the vertical and side to side stabilization adding two more stabilized axis to your existing system.
Accessorize to Extend Your Range Further
The Serene can be used with an optional accessory, the Serene Extension arm, which is an additional arm that the user can quickly and easily mount on their current Serene to extend the length of the arm. It allows a fully adjustable distance in 10mm increments, in order to find the perfect length of the arm to get the camera rig just the right distance from your body. It also increases the boom range of the Serene arm resulting in even better performance.